INT'L CUSTOMERS;  Unless your order's >$400 or has at least one item explicitly stating "includes EMS express mail", free tracking is NOT included-you must optionally elect to purchase it (if you want it).  Service ranges 7-90 days and there's absolutely no way to find out what's going on.

We'll happily accept small orders from all over earth, however...

PURCHASE WITHOUT TRACKING = YOU ASSUME ALL RISK OF LOSS

We've no option to add any tracking to regular 1st class int'l mail (domestic packages now get this for free).
So far (>7000 att. @ this writing), overall risk of disappearance is ~0.46%, with Western Europe/Great Britain/Canada closer to ~0.2% and Australia/New Zealand thus far perfect with well over 1000 combined attempts.

I can't offer Registered Mail anymore-it takes too long hand-writing 3 forms, sealing a box with water-activated tape, and queueing up at the post office...time's just too valued.  We instead offer to partially subsidize EMS Express Mail's high cost, which is always a minimum of $38(and moves up based on a weight in a jiffy!).
The option buys speed & safety, but only you can decide if it is worth it to you.  Minimum order value of $100 to elect this option.

- Add EMS Express Mail (International Orders Only)
$26


 

Straight Razor Scales, Vintage Strops/Hones, Etc.

The Superior Shave Home Page

Contact Us


Who knew these ole' scales would prove so popular?  Not me, that's for sure.  It would seem many are restoring old blades for use.

I don't like having to buy stuff from you-know-where (the place that makes EVERYTHING),...problem is, though we can all smile that straight razors are a growing practice, it is still a miniscule minority of people on earth.

These quality plastic or wood scales are made (long, long ago, I presume) in Germany.  Supply's a problem, so we remove them from this page as they expire from stock, and we've no meaningful answer beyond "no time soon" as to when variants are replenished, so there's not much point asking.

These scales are old stock-likely multiple decades old in most cases.  They're not used, but expect 'shop wear' on all acrylics, especially red.  Conservation wax fills the eccentricities well.

We supply a matched pin/washer for each scale, as shown below; it is either a ~15mm or ~19mm long little pin (based on scale size) and comes with a crimping washer thing.  You can also use nickel, brass, or stainless steel 1/16" rods/washers (a near-lifetime supply's available at any competent hardware store for a few bucks), or the $3 adjustable-tension hex bolts below shown below..


All The Scales Below INCLUDE One of These Pin/Washer Sets (Shown Below)

All The Scales Below INCLUDE One of These Pin/Washer Sets (Shown Above)

You drill a hole in the scale, line up the little washer with something that'll hold it in place, and gently hammer it on.  I like the hex bolts better, but if I do use these, I use a very soft and flat little chunk of wood (that's not got dozens of little holes in it) to hammer the nail/scale/razor/washer sandwich...once you get the washer on that pin good and tight, crimp off the rear and use a little ball peen hammer to get a smooth and natural-looking 'non show' side.

The larger scales get the longer 19mm pin on the right, and the regular-sized scales get the 15mm pin on the left.

Made in Germany.

As we've now made it a point to get this little thing just for all the restorers out there, for now we can offer these on their own for sale, too...you'll receive TWO PINS + TWO WASHERS PER ORDER.  Buy the 15mm size for the majority of razors, but if you've got a particularly thick and hearty 6/8" razor, go for the 19mm model.  Any >6/8" razors should use the 19mm pins.  MINIMUM QUANTITY OF 3 SETS IF PURCHASING THESE PINS ALONE.  If you're buying them with anything else, feel free to buy just one set.

15mm Pin Set f/ Razor Scales (TWO PINS, TWO WASHERS)
$2 In-Stock Free Shipping Worldwide
15mm Pin Sets f/ Razor Scales (5 SETS; TEN PINS + TEN WASHERS)
$8 In-Stock Free Shipping Worldwide


Premium Razor Scale (Marbled Blue)

  • Appropriate for straight razors up to about 11/16" size
  • 143mm long & ~126mm of internal clearance to accommodate distance between the center of a straight razor's hole and tip of its toe
  • Flares out a decent amount, so those Sheffield-type blades with enormously-thick tangs will likely work
  • Most any 11/16" and smaller Solingen or USA classic will be no problem
  • Made in Germany

5/8" Marbled Blue German-Made Straight Razor Scale
$13.50 In-Stock Free Shipping Worldwide


Premium Razor Scale (Red)

  • Used for straight razors up to about 7/8" size
  • 148mm long & ~132mm of internal clearance to accommodate the distance between the center of your straight razor's hole and the tip of its toe
  • The translucent red and the fine acrylic show scratches; in fact every piece we receive shows scratches and that includes any piece you purchase, though any good wax will fill them
  • Will fit many larger classics
  • Fits thick-tanged razors because non-pivoting end has highly 'wedgy' wedge
  • Made in Germany
  • 7 PIECES REMAINING

7/8" Red German-Made Straight Razor Scale
$17.50 In-Stock Free Shipping Worldwide


Brass Hex Bolt Nut & Washers for Straight Razors
Above: the #0 hex bolt/washer/nut combo used in most of our restorations.  You get;
  • One brass 0-80 x 0.5" hex bolt (~1.5mm thick threaded part)
  • One matched brass nut
  • Four (4) wide style #0 brass washers
We crimp off the bolt end & smooth it out with a tiny ball-peen hammer when doing our restorations.  Use a 3/32" socket or tweezers to adjust the tension on the razor scale.  I can't believe it is necessary to print this, but WE WILL NOT HONOR A $3 ORDER FOR ONE OF THESE BOLTS.

#0 Brass Hex/Washer/Bolt Straight Razor Scale Hardware
$3 In-Stock Free USA Shipping (+$2 Int'l Shipping)

Above: #2 hex bolt/washer/nut combo used in most of our restorations.  You get;
  • One 2-56 x 0.75" stainless steel hex bolt (~2.2mm thick threaded part)
  • One matched stainless steel nut
  • Four (4) #2 stainless steel washers
We crimp off the bolt end & smooth it out with a tiny ball-peen hammer when doing our restorations.  Use a 5/64" allen wrench and a 3/16" socket to adjust the tension on the razor scale.  I can't believe it is necessary to print this, but WE WILL NOT HONOR A $3 ORDER FOR ONE OF THESE BOLTS.

SS Hex/Washer/Bolt Straight Razor Scale Hardware
$3 In-Stock Free USA Shipping (+$2 Int'l Shipping)


We must collect sales tax if shipped within Florida.

Home

Top of Page